Your measuring guide
How to measure for wooden blinds
Use a metal tape measure. Write down width first, then drop, and measure every window separately.
Inside the recess
- Measure the opening across the top, middle and bottom. Keep the smallest width.
- Measure down the left, centre and right. Keep the smallest drop.
- Choose Recess and enter those measurements without subtracting anything.
Fitting allowance
We make a 10mm width deduction for recess orders.
Outside the recess / exact size
- Choose where the two outer edges of the blind should finish, then measure between them.
- Measure from the intended top of the blind to its bottom edge.
- Choose Exact and enter the overall finished size.
Plan the space around your blind
Get measuring helpFor outside fitting, plan at least 50mm overlap on each side. Raised slats form a stack above the window: allow at least 250mm, with the actual stack depending on your blind size. Ask us to check clearance.