How to measure for Perfect Fit Shutter Lite
Check compatibility before measuring. Use a metal tape, ruler and a suitable measuring gauge.
Not suitable for square beading. Brackets need at least 18mm insertion beneath the beading; never force a gauge into a resistant seal.
1. Check clearances
Allow at least 23mm around the glass edge to obstructions. Rubber seals must extend no more than 6mm over the glass. Check door clearance for the tilt rod, which projects approximately 87mm from the glass.
2. Measure frame depth
Lay a card across the frame and measure down to the glass with a ruler. The depth must be at least 20mm.
3. Record the visible glass size
Exclude the seals. Measure width and height in three places; use the smallest of each, to the nearest millimetre.
4. Record the handle position
Open the handle and measure from the visible glass edge to the centre of its pivot. Confirm the correct reference edge with us for your handle position.
Check my window with EveryBlind